List All Pages
Argent boxes are, basically, a TA with some smarts. They act as a normal TA, but also give you an X25 link via the D Channel of the OR2 - this is what the EPS uses to get authorisation. A recent...
Autoexec needs to contain these lines:
SET PATH=C:\;C:\ARC;C:\TR;%PATH%
C:\WINDOWS\COMMAND\SCANDISK /ALL /AUTOFIX /NOSUMMARY
IF EXIST C:\ONQ\*TASK DEL C:\ONQ\*TASK
SET TERMID=04
SET ONQ=POS3
SET...
Protocol
Listen on port whatever (23456?)
Receive 1 line of text, regexp check for up to 12 characters [A-Za-z1-9]
receive text
close the connection
open file $logs/$ip_address-$sitename
write text...
You've changed your site, and you need to update the cardxpress machine to be the same as the new layout.
Run Visual Console (in C:\4manwin) and change the layout there (If you don't know how to...
Cabling Layout:
PC:
COM1 -> COM3 on EPS
COM2 -> 'POS' Serial port on Postec
COM3 -> Console on EPS (25 pin connection)
COM4 -> Modem
COM5 -> Output from Printer port on SmartTeller,...
There will probably be old transfer files in C:\ONQ\COMMxx where xx is the site number. You may have multiple site numbers. Go through them all and delete any that are more than a year old, as...
Please change this page according to your needs
You first need to export a pile of the existing registry information from the existing machine. This can be a difficult and insanely annoying problem. On both Ghost images of Win95 CardXpress...
Useful files are attached to this page.
Win95 HyperAccess Setup Serial Numbers: NA277284A4, NA2788396A, NA27900517, NA2790068C, NA27900705 (Probably need to put this somewhere else)
Issues:
Reconnect TCP Session
Unable to reconnect - how to log locally
Keepalives for NAT?
SMS Sending
Do I just connect each time I want to send data? That'll probably work. Resolves keepalives...
The easiest way I've found is to replace the existing CDRom (because they're always dead by the time you get to them) and boot up a CD with Ghost 8.0 on it — Ghost 8.0 is the best, and every geek...
When you're creating the VM, you need a machine with 5 serial ports. See cabling for how they all plug together. Unfortunately, VMWare only supports 4 serial ports, which is fair enough, but we...
If you are allowed to edit pages in this Site, simply click on edit button at the bottom of the page. This will open an editor with a toolbar pallette with options.
To create a link to a new page,...
This document is a 'howto' on how to rebuild a CardXpress machine. This should be followable by a reasonably competent IT professional, so if I'm unavailable for any reason, you can use your own IT...
Download the rar and .reg file below. Install the contents of the rar to c:\program files, and then install the reg.
CardXpress Support Wiki
Only authorised people can view this Wiki.
It contains information on diagnosing and fixing problems with a Mobil/OnQ CardXpress machine
If your CardXpress machine has been...
The NII Driver controls the receipt printer, and the prncap program talks to it.
The driver is downloadable from http://www.ieoem.com/support/Drivers/NipPri/NII_Driver_Win_95-98_N345.zip, and there...
OnQ uses pcAnywhere to connect to and support the machines. However, the latest version of PC Anywhere does NOT support 95 or 98. However, when you purchase a full pcAnywhere version, on the CD is...
To get 4manwin and all the postec stuff working, you need to copy some registry information from the existing machine, and then install the BDE. Before running 4manwin, you also need to copy a DLL...
Printer Upgrade instructions.
First, remove the printer from the box.
Using the tape that is supplied to hold the lid shut, stick down the 'paper out' sensor on the left, on the inside. Due to the...
Old News..
This is depreciated. See how to replace the printer for how to replace it and use the new printcapture software.
prncap listens to COM5 (see cabling) and outputs to LPT1. This is what...
Note, you need the new printer first.
The source code to the new Perl Printcapture program is here.
The complete installer is available here, attached to this page
# Replacement Printcapture program for Mobil CardXpress machines
# Configuration file location:
#
my $cfgfile = "C:\\PRNCAP\\PRNCAPT.INI";
# Configuration variables that matter:
# Port = x //...
radmin is a reasonable (and very fast) alternative to pcAnywhere, but can only be used over an Internet connection. Download it from famatech.
This is a 'bandaid' solution to the ongoing problems with the standard CardXpress build. The major change is an upgrade to a faster computer, running Windows 98se. This alleviates all of the PC...
With the CardXpress machines, I normally install three seperate ways of connecting to the machine.
pcAnywhere, which is used by OnQ by default. This needs to be installed on the Virtual Machine....
Welcome page
What is a Wiki Site?
How to edit pages?
How to join this site?
Site members
Recent changes
List all pages
Page Tags
Site Manager
Page tags
Add a new page
edit this panel
# SIP Monitor replacement for Mobil CardXpress
# Displays everything that is received via the serial port, and
# sends it to a dedicated machine for logging.
$comport = 1;
use...
'SIP Console' is just a Hyperterminal session listening to the Debug port of the EPS. It's not actually REQUIRED for anything, except for potentically debugging and checking things.
However, due to...
Members:
Moderators
Admins
The following script needs to be run on startup. This is based very strongly on the original C:\onqdesk\operator\startusc.bat supplied with the machines. The easiest way to do this is to edit that...
Fuel ATM
item1
item2
All expenses are passed onto the customer. This includes:
Diesel
Accomodation
Meals
Drinks
Hours traveled is charged at $40ex/hour. Travelling time is calculated as the time from the previous...
Install VNC on the host computer. If you're using linux as a host OS, use the Xvnc package. If the machine doesn't have internet access, then there's no use doing this.
If you're running Windows as...
Unfortunately, the current CardXpress machines are Dying. There's no hardware left to fix them, and OnQ can't support them any more. That leaves a pile of frustrated distributors, and very few...
According to Wikipedia, the world largest wiki site:
A Wiki ([ˈwiː.kiː] <wee-kee> or [ˈwɪ.kiː] <wick-ey>) is a type of website that allows users to add, remove, or otherwise edit...
